Skip to Content

Choose your appointment

GateMix™. Mix to the core.

GateMix™ is an insert that sits in the hot-runner nozzle, right at each gate. It homogenises virgin and recycled polymers, colourants and additives before they reach the cavity. The result: fewer streaks and shade shifts, less scrap, at least 15% lower colourant and additive dosage, and rPET compliance. Same cycle time, same hot runner, no capital request.

In 30 minutes we'll look at your parts, your moulds and your materials, and tell you honestly whether GateMix™ is a fit. If it is, we tune the insert to your hot runner and run a trial on your own tool against a reference, with success criteria agreed beforehand.

Pick a slot that suits you. The video link is sent automatically.

Talk soon,

Thomas De Moor, Keiryo Packaging SA

Online
30 minutes

FENIC improves PET morphology during injection moulding, so each bottle does more with less material. One insert sits in each hot-runner nozzle tip, with no change to your machine, mould or line.

Two ways to use it: the same performance with less material, or more performance (barrier, strength, heat resistance) with the same material.

In 30 minutes we'll look at your part, your material and your line, and tell you honestly whether FENIC is a fit. If it is, we agree the next steps: access to our data, then a bespoke trial on your own tool.

Pick a slot that suits you. The video link is sent automatically.

Talk soon,

Thomas De Moor, Keiryo Packaging SA

Online
30 minutes